full-scale model

英 [fʊl skeɪl ˈmɒdl] 美 [fʊl skeɪl ˈmɑːdl]

全尺寸模型;实尺模型

计算机



双语例句

  1. There is a full-scale model of elephant at the museum.
    博物馆有个跟原尺寸一样大小的大象模型。
  2. He made a full-scale model of a car.
    他做了一台实体大小的汽车模型。
  3. The type of shear connectors selection test and full-scale model test for the anchorage zone segment of Jintang Bridge, which is under-construction, were the project background.
    本文以在建中的金塘大桥的索塔锚固区剪力键选型试验和节段足尺模型试验为项目背景。
  4. A full-scale working model of something built for study or testing or display.
    实验、研究或展示用的与原物尺寸一样的工作模型。
  5. Full-Scale Model Test and Study of Stay Cable Anchorage Zones in Pylons of Fumin Bridge in Shenyang
    沈阳市富民桥索塔锚固区足尺节段模型试验研究
  6. At the same time, a full-scale model test was operated in China to make sure that the construction plan was feasible.
    为了验证此施工技术的可操作性,确保现场施工万无一失,还在国内进行了足尺模型拉升试验。
  7. Full-scale Model Test for Pylon Segment of Changshou Yangtse River Highway Bridge
    长寿长江公路大桥索塔节段足尺模型试验研究
  8. Full-Scale Model Test and Numerical Modeling for Behavior of Cast-in-Place Concrete Large Diameter Pipe Pile under Lateral Load
    PCC桩水平承载特性足尺模型试验与数值模拟
  9. By means of the full-scale model on the shaking table for simulation earthquake action, the researches have been on the anti seismic ability of stone curtain wall connected by anchors.
    通过对振动台上足尺寸模型试件进行模拟地震试验,研究了该超大规格石材背栓连结石幕墙的抗震性能。
  10. Study of trajectory of material flow through experimental full-scale model material flow control in 100% continuous casting part ⅰ& basic data statistic estimation
    用一比一大模型测定炉料落下轨迹的研究全连铸生产的物流管理之一&基础数据的统计、测定
  11. Study on ultimate bearing capacity of reinforced slopes with full-scale model test
    加筋边坡在坡顶荷载作用下的极限承载能力
  12. In order to investigate the influence from this hydraulic initial condition, physical flood simulation tests were carried out on a full-scale dike model.
    为了研究这一因素的影响,在原尺寸堤防模型上完成了自然洪水模拟试验。
  13. Full-scale model test and nonlinear analysis of steel liner reinforced concrete penstock subjected to high internal pressure
    超高水头钢衬钢筋混凝土明管结构试验及非线性分析
  14. This paper uses the similarity theory to discuss the ship model design of restraint torsion, finds the influencing laws of the plate thickness ratio and derives the conversion relationship between the testing result of the ship model and the full-scale model.
    本文应用相似理论讨论了约束扭转问题的船模设计,推出了板厚比的影响规律和模型测试结果对原型的换算关系,并对船模设计提出一种参考意见。
  15. This paper introduced full-scale model and application of using Aspen Plus software to simulate the manufacture process of concentrated nitric acid including thermodynamic properties.
    介绍了在浓硝酸制备工艺过程中使用aspenplus软件开发包括热力学在内的全流程模拟模型及其应用情况。
  16. A practical method has been developed for evaluating design loads on hydrofoil crafts based on the data of full-scale and model tests.
    本文根据实艇和模型的试验数据分析,建立了水翼艇艇体设计载荷估算方法。
  17. In order to assess the fatigue performance of the key connection details of tensile anchor plates in cable-beam anchorage zones, a full-scale model fatigue test of the tensile anchor plates of Zhanjiang gulf bridge was conducted.
    为评估湛江海湾大桥锚拉板式索梁锚固结构关键构造细节的疲劳性能,对该结构进行了足尺模型疲劳试验。
  18. Since it is hard to perform a full-scale model test, numerical analysis becomes an important basis and also one of the most difficult and pivotal problems in design.
    由于无法对其进行足尺模型试验,数值分析就成为此类结构设计的重要依据,也是悬索桥设计中的难点和关键问题之一。
  19. With a full-scale model, tests the contamination exclusion effect of the air distribution mode and the result is satisfactory.
    建立了实体模型,对这种气流分布方式的排污效果进行了实验测试,结果令人满意。
  20. A full-scale model experiment that according to the constructions of Guangbei Section of National Highway 108 has been carried out in laboratory.
    按照国道108线广元段广北二期工程的路面路基的实际结构型式进行了室内足尺大型动静态模型试验。
  21. The full-scale logic model of the system database designed by using normative design methodology makes the information of the management of personnel reasonably organized and effectively used;
    采用规范设计法设计出系统数据库的全局逻辑模型,使人事管理信息得到合理的组织和有效的使用;
  22. And also the mechanical properties of full-scale model of the connection node under cyclic load were analyzed with nonlinear finite element method.
    并采用考虑非线性的有限元方法对节点进行循环荷载作用下的受力性能的分析。
  23. We make a full-scale model test of anchorage zone. Experiment and FEM analysis show that: the anti-crack safety coefficient is 1.3 and crack opening safety coefficient is 1.6, so the structure is demonstrated safety.
    进行了塔柱节段足尺模型试验,试验与有限元分析结果表明:塔柱节段足尺模型开裂安全系数为1.3,裂缝宽度安全系数为1.6,塔柱的设计方案是安全的。
  24. Based on the fact, the research carries out a method that is to test the functions of the Fluid Viscous Damper through simulated full-scale model testing.
    因此,本文提出了一种通过足尺寸模型的仿真测试来完成阻尼器性能的测试。
  25. Strength analysis of a full-scale model of the wing joint is made based on ANSYS, and the stress distribution law of different parts of the wing joint is obtained, especially the law of the round of bolt holes, floor and side rid of wing joint.
    对接头的原尺寸模型进行了强度分析,得出了接头各部分的应力分布规律,特别是螺栓孔周围、底板和侧肋的应力分布情况。
  26. Last, to combine various teaching methods and form a full-scale teaching model.
    多种教学法相结合,形成立体教学模式。
  27. The objects of the numerical simulation include a two-dimensional axi-symmetric model, a three-dimension unit cell model and a three-dimension full-scale model with chemistry reaction.
    在此过程中,分别对二维轴对称模型、三维单元体模型和包含化学反应的三维完整模型进行了数值模拟。
  28. This essay establishes a full-scale model. Simulate the wind load characteristic of the plants and analyze typhoon vulnerability. At last obtain the failure probability under certain wind velocity of building with opening and enclosed construction.
    本文建立全尺寸模型,模拟轻钢型工业厂房风荷载特性并进行易损性分析,得出了厂房在开孔不开孔两种情况下的结构失效概率。
  29. A full-scale car model with details which can be used for simulation was constructed. The method for simplifying models and the fast simulation method were researched too.
    立了能进行电磁仿真的精细全尺寸汽车模型,探讨了模型简化的方法及能加快计算的仿真方法的应用。
  30. According to the demands from customers, the paper made position for the development of ATV market. It applied such as bionic design method for the prototype of a conceptual design of ATV, and then made a full-scale physical model.
    文中针对客户需求,对ATV的开发进行市场定位,应用仿生等设计方法,对ATV的造型进行了概念设计,并制作完成了全尺寸物理模型。